Search
Contact Us
Tel：+86-574-86235936
Search
Contact Us
Home > Product > Servo Controller Part
Servo Controller Part
Technology from korea,made in China
| AF 注塑机参数对照表 | 245/70 | ||||
| 技术参数 | Description | 单 位 | AF70 | ||
| Injection unit | 射胶系统 | Unit | A | B | C |
| 理论注射容积 | Shot Volume | cm3 | 85 | 121 | 153 |
| 实际注射量（ps） | Shot Weight(ps) | g | 3 | 111 | 140 |
| 实际注射量（ps） | Shot Weight(ps) | Oz(盅司) | 28 | 3.9 | 5 |
| 螺杆直径 | Screw Diameter | mm | 265 | 32 | 36 |
| 注射压力 | Injection Pressure | Mpa | 55 | 203 | 160 |
| 理论注射速率 | Injection Rate | g/sec | 24 | 71 | 90 |
| 螺杆长杆比 | Screw L/D Ratio | 21 | 18.6 | ||
| 螺杆行程 | Screw Stroke | mm | 150 | ||
| 螺杆转速 | Screw Speed(stepless) | Rpm | 0～239 | ||
| CLAMPING UNIT 锁模系统 | |||||
| 锁模力 | Clamping Force | ton | 70 | ||
| 开模行程 | Opening Stroke | mm | 280 | ||
| 模板尺寸 | Platen Size | mmxmm | 480x480 | ||
| 拉杆间距 | Space Between Tie Bars | mmxmm | 325x325 | ||
| 模板最大距离 | Max. Daylight | mm | 620 | ||
| 容模量（最薄-最厚） | Mold Thickness(min.-max.) | mm | 100-340 | ||
| 顶出行程 | Hydraulic Ejection Stroke | mm | 90 | ||
| 顶出力 | Hydraulic Ejection Force | ton | 3.1 | ||
| 顶针数 | Ejector Pin | Unit | 1 | ||
| POWER UNIT 电力/电热 | |||||
| 最大油泵压力 | Max Pump Pressure | Mpa | 16 | ||
| 油泵电机 | Pump Motor | Kw | 9.5 | ||
| 电热量 | Heating Capacity | Kw | 6 | ||
| 温度控制区数 | Number of Temp Control Zones | Unit | 4 | ||
| GENERAL UNIT 其他 | |||||
| 油箱容积 | Oil Tank Capacity | L | 200 | ||
| 外形尺寸（LxWxH） | Machine Dimensions | mxmxm | 4.03x1.05x1.7 | ||
| 理论机重 | Machine Weight | ton | 3.2 | ||
