Search
Contact Us
Tel：+86-574-86235936
Search
Contact Us
Home > Product > Servo Controller Part
Servo Controller Part
Technology from korea,made in China
| AF 注塑机参数对照表 | 688/170 | ||||
| 技术参数 | Description | 单 位 | AF170 | ||
| Injection unit | 射胶系统 | Unit | A | B | C |
| 理论注射容积 | Shot Volume | cm3 | 289 | 366 | 452 |
| 实际注射量（ps） | Shot Weight(ps) | g | 266 | 337 | 415 |
| 实际注射量（ps） | Shot Weight(ps) | Oz(盅司) | 9 | 11.9 | 15 |
| 螺杆直径 | Screw Diameter | mm | 40 | 45 | 50 |
| 注射压力 | Injection Pressure | Mpa | 238 | 188 | 152 |
| 理论注射速率 | Injection Rate | g/sec | 120 | 151 | 187 |
| 螺杆长杆比 | Screw L/D Ratio | 22 | 20 | ||
| 螺杆行程 | Screw Stroke | mm | 230 | ||
| 螺杆转速 | Screw Speed(stepless) | Rpm | 0～224 | ||
| CLAMPING UNIT 锁模系统 | |||||
| 锁模力 | Clamping Force | ton | 170 | ||
| 开模行程 | Opening Stroke | mm | 450 | ||
| 模板尺寸 | Platen Size | mmxmm | 690x690 | ||
| 拉杆间距 | Space Between Tie Bars | mmxmm | 475x475 | ||
| 模板最大距离 | Max. Daylight | mm | 990 | ||
| 容模量（最薄-最厚） | Mold Thickness(min.-max.) | mm | 150-540 | ||
| 顶出行程 | Hydraulic Ejection Stroke | mm | 150 | ||
| 顶出力 | Hydraulic Ejection Force | ton | 4.5 | ||
| 顶针数 | Ejector Pin | Unit | 5 | ||
| POWER UNIT 电力/电热 | |||||
| 最大油泵压力 | Max Pump Pressure | Mpa | 16 | ||
| 油泵电机 | Pump Motor | Kw | 18.5 | ||
| 电热量 | Heating Capacity | Kw | 11.5 | ||
| 温度控制区数 | Number of Temp Control Zones | Unit | 4 | ||
| GENERAL UNIT 其他 | |||||
| 油箱容积 | Oil Tank Capacity | L | 350 | ||
| 外形尺寸（LxWxH） | Machine Dimensions | mxmxm | 5.36x1.34x2 | ||
| 理论机重 | Machine Weight | ton | 5.5 | ||
