Search
Contact Us
Tel：+86-574-86235936
Search
Contact Us
Home > Product > Servo Controller Part
Servo Controller Part
Technology from korea,made in China
| AF 注塑机参数对照表 | 504/130 | ||||
| 技术参数 | Description | 单 位 | AF130 | ||
| Injection unit | 射胶系统 | Unit | A | B | C |
| 理论注射容积 | Shot Volume | cm3 | 204 | 251 | 318 |
| 实际注射量（ps） | Shot Weight(ps) | g | 187 | 231 | 293 |
| 实际注射量（ps） | Shot Weight(ps) | Oz(盅司) | 606 | 8.2 | 10.3 |
| 螺杆直径 | Screw Diameter | mm | 36 | 40 | 45 |
| 注射压力 | Injection Pressure | Mpa | 248 | 201 | 159 |
| 理论注射速率 | Injection Rate | g/sec | 93 | 114 | 137 |
| 螺杆长杆比 | Screw L/D Ratio | 23.3 | 21 | 18.6 | |
| 螺杆行程 | Screw Stroke | mm | 200 | ||
| 螺杆转速 | Screw Speed(stepless) | Rpm | 0～213 | ||
| CLAMPING UNIT 锁模系统 | |||||
| 锁模力 | Clamping Force | ton | 130 | ||
| 开模行程 | Opening Stroke | mm | 370 | ||
| 模板尺寸 | Platen Size | mmxmm | 610x610 | ||
| 拉杆间距 | Space Between Tie Bars | mmxmm | 425x425 | ||
| 模板最大距离 | Max. Daylight | mm | 820 | ||
| 容模量（最薄-最厚） | Mold Thickness(min.-max.) | mm | 150-450 | ||
| 顶出行程 | Hydraulic Ejection Stroke | mm | 130 | ||
| 顶出力 | Hydraulic Ejection Force | ton | 3.8 | ||
| 顶针数 | Ejector Pin | Unit | 5 | ||
| POWER UNIT 电力/电热 | |||||
| 最大油泵压力 | Max Pump Pressure | Mpa | 16 | ||
| 油泵电机 | Pump Motor | Kw | 13 | ||
| 电热量 | Heating Capacity | Kw | 10 | ||
| 温度控制区数 | Number of Temp Control Zones | Unit | 4 | ||
| GENERAL UNIT 其他 | |||||
| 油箱容积 | Oil Tank Capacity | L | 280 | ||
| 外形尺寸（LxWxH） | Machine Dimensions | mxmxm | 4.97x1.26x1.95 | ||
| 理论机重 | Machine Weight | ton | 4.2 | ||
